| 1 2 |
|
| Advanced Tool Kit for the Fiber Optic Installation Professional |
| Manufacturer: Corning |
| This kit, with a pop-up handle and wheels, was designed by contractors, for contractors. It includes tools for preparing fiber optic cables, splice closures, and fiber optic hardware. The kit also includes cable cleaners, a first aid kit, LED head lamp, safety vest, safety glasses, and gloves.... |
|
|
|
|
|
| CFK 1003 - Complete Fiber Optic Cleaning Kit |
| Manufacturer: ITW Chemtronics |
| Using the Patented Combination Cleaning Process™
CFK 1003 Kit Contents:
• QbE® Fiber Optic Cleaning Tool
• “MX” Pens (FW-2150) to moisten QbE® for superior precision cleaning
• 2.5mm (48052F) cleanroom grade swab tools for backplane cleaning
• Precision “paddle-tip” cleanroom grade swab tool (38542F) to clean fusion splice v-grooves
• Pr... |
|
|
|
|
|
| Corning Single-Fiber and Multifiber Connector Cleaning Kits |
| Manufacturer: Corning |
| The Single-Fiber and Multifiber Connector Cleaning Kits are designed for effective cleaning and visual inspection of fiber optic connector end-faces in LAN, central office and outside plant environments, whether fully accessible or through an adapter. Whether performing a ‘dry’ clean, ‘wet’ clean or a combination of the two, each kit offers all the... |
|
|
|
|
|
| Fluke Networks Cleaning Kits |
| Manufacturer: Fluke Networks |
| Dirt, dust and other contaminants are the enemy of high-speed data transmission over optical fiber. Today’s network applications require more bandwidth, making loss budgets tighter than ever. It is critical that all optical connections are clean and free of contaminants to ensure application success.
Fluke Networks’ Fiber Optic Cleaning Kits have... |
|
|
|
|
|
| Fusion Splicing Tool Kit |
| Manufacturer: Corning |
| This kit is designed to prepare cables and fiber for fusion splicing. It includes tools and supplies required for cable jacket removal and fusion splicing.
... |
|
|
|
|
|
| No-Slack Optical Fiber Access Tool |
| Manufacturer: Corning |
| The no-slack optical fiber access Tool (NOFAT) is suitable for locations where no cable slack can be obtained and the buffer tubes must be accessed while remaining wrapped around the central member. The NOFAT’s unique design allows buffer tubes to be entered in this situation. The tool provides a guide to allow a scalpel to slice the top off a buff... |
|
|
|
|
|
| Optical Fiber Access Tool |
| Manufacturer: Corning |
| The Corning Cable Systems Optical Fiber Access Tool (OFAT) is designed to provide mid-span fiber access in standard Corning Cable Systems ALTOS® Cables. This rugged hand tool will accommodate buffer tubes from 2.4 to 3.0 mm. The OFAT clamps over a buffer tube. As the tool is pulled along the buffer tube, two offset blades split the tube without dam... |
|
|
|
|
|
| Ribbon Splitting Tool |
| Manufacturer: Corning |
| The Corning Cable Systems Ribbon Splitting Tool is designed to allow separation
of 12, 24 and 36- fiber ribbons into smaller ribbons. The tool closes around the ribbon fibers as the ribbon settles into the proper slot. With actuator depressed, the tool slides along a length of the ribbon, separating the length of ribbon that is needed into smaller... |
|
|
|
|
|
| Ripcord Puller for Outdoor Cable Tool |
| Manufacturer: Corning |
| The Corning Cable Systems Ripcord Puller for outdoor cable tool, when used with a suitable cordless screwdriver, can easily pull ripcords through the sheath and/or steel tape armor found in most outdoor fiber optic cables.
... |
|
|
|
|
|
| Splicer V-Groove Cleaning Kit |
| Manufacturer: AFL |
| Contamination in the v-groove of the splicer is still a primary source of trouble for the splicing technician. This is especially problematic when splicing with a fixed v-groove Fusion Splicer. Environmental contamination, such as dust, dirt, and fiber coating debris, as well as, the silica deposits generated during the fusion process eventually fi... |
|
|
|
|
| 1 2 |